Tesla Model S Owners & Service Manuals

Tesla Model S: Climate

You can check the interior temperature and heat or cool the cabin before driving (even if it's in a garage), control the seat heaters, and defrost the windshield:

  • Enable or disable Defrost Car by swiping up the from bottom, which helps melt snow, ice, and frost on the windshield, windows, and mirrors.
  • Enable or disable Dog Mode or Camp Mode.
  • Customizing climate controls allows you to precondition the cabin to your desired temperature and turn on or off the steering yoke and seat heaters.
  • Vent the windows.

Using the mobile app to precondition Model S also warms the Battery as needed. The mobile app will notify you once your vehicle has reached the desired preconditioning temperature.

NOTE: In extremely cold weather or icy conditions, it is possible that your charge port latch may freeze in place. In cases where you cannot remove or insert the charge cable, or the vehicle is not Supercharging due to the latch being frozen in place, use your Tesla mobile app to enable Defrost Car for approximately 30-45 minutes. This can help thaw ice on the charge port latch so the charge cable can be removed or inserted.

Location

Locate Model S with directions, or track its movement across a map.

Summon

You can park or retrieve Model S using Summon (see Summon) or Smart Summon (see Smart Summon).

Schedule

Enable scheduled charging or departure, and precondition the vehicle. See Using Scheduled Charging and Using Scheduled Departure for more information.

Security

The Security tab allows you to do the following:

  • Pair your phone to the vehicle
  • Enable or disable Sentry Mode
  • Enable or disable Valet Mode
  • Enable or disable Speed Limit Mode and receive notifications when the vehicle's driving speed is within approximately 3 mph (5 km/h) of your selected maximum speed

Upgrades

View and purchase the latest upgrades available for your vehicle, such as full self-driving.

Service

See Schedule Service for information on how to schedule service through the mobile app.

Roadside

View roadside resources and request roadside assistance (where applicable). For more information on Roadside Assistance, see Contacting Tesla Roadside Assistance.

Granting Access to a Second Driver

Add and remove access permission for an additional driver from the Tesla mobile app.

NOTE: Tesla mobile app version 4.3.1 or higher is required. Additional drivers can either use a previously registered Tesla Account or use the app to create a new Tesla Account.

To add an additional driver, in the Tesla mobile app from the vehicle home screen, go to Security > Add Driver and follow the onscreen instructions.

NOTE: The additional driver has access to all app features except purchasing upgrades.

To remove access, use the mobile app and go to Security > Manage Drivers and follow the onscreen instructions.

    READ NEXT:

     Charging

     Electric Vehicle Components

     High Voltage Components

    Heat Pump Assembly Front Drive Unit Service Access Panel for High Voltage Components (Penthouse) High Voltage Battery High Voltage Busbars Rear Drive Unit Charge Port NOTE: Plaid version not

    SEE MORE:

     Door Glass - LH - Front (Remove and Replace)

    Removal Remove door inner belt glass seal (refer to procedure) Loosen but do not remove clamp nut securing door glass to regulator (torque 7.5 Nm). Caution: Take care not to damage component(s). Low

     Trim - Rear Trunk - Floor (Remove and Replace)

    Removal Open the rear liftgate for access. Release the tethers (x2) and clips (x2) that secure the trunk cover to the body. Remove the trunk cover. Release the handle and remove the rear load space cover. Re

    © 2019-2024 Copyright www.tesms.org