Tesla Model S: Acceleration Modes
Touch Controls > Pedals & Steering > Acceleration to choose a preferred acceleration mode:
- Chill limits acceleration for a slightly smoother and gentler ride.
NOTE: When Chill is selected, Chill displays on the instrument panel, above the driving speed.
- Sport provides the normal level of acceleration.
- Insane (called Plaid on performance vehicles) (if equipped) provides access to the maximum level of acceleration immediately available.
NOTE: Using the increased torque and power available in Insane or Plaid mode can reduce range and efficiency.
NOTE: Insane or Plaid strives to keep the Battery within an optimal temperature range. In addition to heating the Battery, these settings also cool the battery when necessary (for example, while driving at high speeds, during rapid acceleration, driving for long periods, etc.).
In addition, Model S features Drag Strip Mode. Using Drag Strip Mode to precondition your Model S is useful before a short distance race.
Drag Strip Mode
Drag Strip Mode preconditions the Battery and drive unit to ideal operating temperatures for timed acceleration. Model S stays in Drag Strip Mode for three hours, even if you leave the vehicle. After three hours, the feature times out to prevent unnecessary energy consumption (for example, you leave the vehicle and forget to cancel Drag Strip Mode).
When using Drag Strip Mode, Model S consumes more energy to keep the Battery within an optimal temperature range.
Cancel Drag Strip Mode at any time by toggling Drag Strip Mode off.
NOTE: Drag Strip Mode automatically disables Slip Start when enabled.
WARNING: Drag Strip Mode is designed for use on closed circuit driving courses only. It is the driver's responsibility to ensure that driving style and acceleration do not endanger or inconvenience other road users.
How to Launch the Vehicle
The touchscreen provides visual instructions on how to launch:
1. Touch Controls > Pedals & Steering > Drag Strip Mode.
2. Wait for the instrument panel to indicate that the vehicle is Peak Performance Ready.
3. With Model S shifted into Drive and at a complete stop, firmly hold the brake pedal with your left foot, then fully press the accelerator pedal.
4. Once step 3 is complete, the front suspension begins lowering into a "cheetah stance".
NOTE: Suspension lowering for "cheetah stance" significantly reduces ground clearance.
5. Wait for the instrument panel to indicate that Drag Strip Mode is Ready to Launch.
6. Once you see "Cheetah Stance Enabled" and "Ready to launch" on the instrument panel, release the brake pedal to launch the vehicle.
READ NEXT:
Track Mode
Track Mode, available only on Plaid Model S vehicles, is
designed to modify the stability control, traction control,
regenerative braking, and cooling systems to increase
performance and handling w
Using Track Mode
Track Mode is always disabled when you start Model S.
To enable Track Mode for your current drive, shift into
Park and follow these steps:
1. Touch Controls > Pedals & Steering > Track Mod
Customizing Track Mode
To customize Track Mode, touch Track Mode Settings on
the Track Mode popup that appears on the map when
you enable Track Mode. You can also access the Track
Mode settings by touching Controls >
SEE MORE:
Foam - Cushion
Foam - Cushion - Driver's Seat (Remove and Replace)
Removal
Note: This component cannot be serviced
individually. To service this component, perform the
following:
Replace the driver's seat trim and foam assembly (refer to
procedure).
Installation
Locking Devices
General
Always replace locking devices with ones of the same design.
Caution: Do not use impact tools on fasteners that are
threaded into aluminum components.
Locking tabs and washers
Always inspect locking tabs and washers. Do not reuse if damaged.
Pipe and hose unions
To preve
